PDWORD lpflOldProtect // 原访问方式 用于保存改变前的保护属性 易语言要传址

);

hProcess

Handle to the process whose memory protection is to be changed. The handle must have PROCESS_VM_OPERATION access. For more information on PROCESS_VM_OPERATION, see OpenProcess.

目的进程的句柄。

lpAddress

Pointer to the base address of the region of pages whose access protection attributes are to be changed.

All pages in the specified region must be within the same reserved region allocated when calling the VirtualAlloc or VirtualAllocEx function using MEM_RESERVE. The pages cannot span adjacent reserved regions that were allocated by separate calls to VirtualAlloc or VirtualAllocEx using MEM_RESERVE.

要修改内存的起始地址。

dwSize

Size of the region whose access protection attributes are changed, in bytes. The region of affected pages includes all pages containing one or more bytes in the range from the lpAddress parameter to (lpAddress+dwSize). This means that a 2-byte range straddling a page boundary causes the protection attributes of both pages to be changed.

要修改内存的大小

flNewProtect

Memory protection. This parameter can be one of the memory protection options, along with PAGE_GUARD or PAGE_NOCACHE, as needed.

保护选项，见下。

lpflOldProtect

[out] Pointer to a variable that receives the previous access protection of the first page in the specified region of pages. If this parameter is NULL or does not point to a valid variable, the function fails.

必须指向一个有效的变量，如果是NULL或者无效的变量，函数将失败。

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

如果成功，返回非零。失败返回零。

The access protection value can be set only on committed pages. If the state of any page in the specified region is not committed, the function fails and returns without modifying the access protection of any pages in the specified region.

只能在已经提交的页面上进行操作，否则返回失败。

The PAGE_GUARD protection modifier establishes guard pages. Guard pages act as one-shot access alarms. For more information, see Creating Guard Pages.

It is best to avoid using VirtualProtectEx to change page protections on memory blocks allocated by GlobalAlloc, HeapAlloc, or LocalAlloc, because multiple memory blocks can exist on a single page. The heap manager assumes that all pages in the heap grant at least read and write access.

Windows Me/98/95: You cannot use VirtualProtectEx on any memory region located in the shared virtual address space (from 0x80000000 through 0xBFFFFFFF).

其中DWORD flNewProtect可选择：

#define PAGE_NOACCESS 0x01

#define PAGE_READONLY 0x02

#define PAGE_READWRITE 0x04

#define PAGE_WRITECOPY 0x08

#define PAGE_EXECUTE 0x10

#define PAGE_EXECUTE_READ 0x20

#define PAGE_EXECUTE_READWRITE 0x40

#define PAGE_EXECUTE_WRITECOPY 0x80

#define PAGE_GUARD 0x100

#define PAGE_NOCACHE 0x200

#define PAGE_WRITECOMBINE 0x400

Value Description

PAGE_EXECUTE

Enables execute access to the committed region of pages.

An attempt to read or write to the committed region results in an access violation.

PAGE_EXECUTE_READ

Enables execute and read access to the committed region of pages.

An attempt to write to the committed region results in an access violation.

PAGE_GUARD

Pages in the region become guard pages.

An attempt to access a guard page causes the system to raise a STATUS_GUARD_PAGE exception and turn off the guard page status. Guard pages thus act as a one-shot access alarm.

The PAGE_GUARD flag is a page protection modifier. An application uses it with one of the other page protection flags, with one exception: it cannot be used with PAGE_NOACCESS.

When an access attempt leads the system to turn off guard page status, the underlying page protection takes over.

If a guard page exception occurs during a system service, the service typically returns a failure status indicator.

PAGE_NOACCESS

Disables all access to the committed region of pages.

An attempt to read from, write to, or execute in the committed region results in an access violation exception, called a general protection (GP) fault.

PAGE_NOCACHE

Allows no caching of the committed regions of pages.

The hardware attributes for the physical memory should be specified as no cache. This is not recommended for general use. It is useful for device drivers; for example, mapping a video frame buffer with no caching.

This flag is a page protection modifier and is valid when used with a page protection other than PAGE_NOACCESS.

PAGE_READONLY

Enables read access to the committed region of pages.

An attempt to write to the committed region results in an access violation.

If the system differentiates between read-only access and execute access, an attempt to execute code in the committed region results in an access violation.