2002.8-2007.7：西安交通大学动力工程多相流国家重点实验室，副教授

2007.8-至今：西安交通大学动力工程多相流国家重点实验室，教授，博导

2002.9-至今：西安交通大学动力工程多相流国家重点实验室，副主任

[1] 郭烈锦，白博峰，张西民，张少军，王鑫，冉新权.油气集输的节能减排和安全高效关键工艺及装备，国家发明二等奖.2009

[2] 郭烈锦，白博峰，高晖，陈学俊，张西民，李广军，何利民，刘文红，杨靖，王忠勇，顾汉洋.油气水多相流动规律与螺旋管流除砂理论及技术.陕西省科学技术奖（自然科学类）一等奖.2003

[3] 郭烈锦，白博峰，张少军，王鑫，张西民，顾汉洋.油气水多相流在线监测与输送工艺和装备的关键技术及其应用.陕西省科学技术奖（技术发明类）一等奖.2007

[4] 郭烈锦，赵亮，魏进家，陈学俊，何银年，陈斌，白博峰，张西民.气（汽）液两相与多相流动力学及传热基本规律.高等学校科学技术奖自然科学一等奖.2006

[1] 白博峰,苏燕兵,严俊杰,王俊奇,多进气道超音速旋流分离与回压装置,发明专利,ZL200610043158.2,授权日：2008.07.09

[2] 白博峰,左志涛,甲醇制备氢气的方法.发明专利,ZL200610104410.6,授权日：2008.05.07

[3] 白博峰,张海滨,刘利,孙慧娟.横流中湍流气液掺混流场测试装置,发明专利,ZL200910020982x,授权日期：2010.8.11

[4] 白博峰,常春,一种超音速凝结与旋流分离装置,发明专利,ZL200910023458.8,授权日：2011.2.25

[5] 王道富,徐永高,张书平,白博峰,跨音速可控涡气体除湿装置,发明专利,申请号：200910081813.7,申请日：2009.04.10；公开号：CN101518709；公开日：2009.09.02

[6] 白博峰,王科,吴革生,徐永高,张书平,一种超音速旋流凝结分离组合喷管,发明专利,申请号：200610105199.X,申请日：2006.12.18；公开号：CN101002992A；公开日：2007.07.25

[7] 白博峰,常春,激波可控超音速气体除湿装置,发明专利,申请号：200910024347.9,申请日：2009.10.16

[8] 白博峰,孙慧娟,张海滨,刘利.一种水冲压发动机强化湍流掺混方法,国防发明专利,申请号200910120276.2,申请日期2009.1.21

[9] 白博峰,吕孝飞,一种基于热流物流匹配的冷流系统,发明专利,申请号：200910020983.4,申请日：2009.01.20；公开号：CN101476671A；公开日：2009.07.08

[10] 白博峰,刘茂龙.天然气长输管道安全投产置换计算软件,计算机软件著作,2008SR15575,2008

[11] 郭烈锦,白博峰,王忠勇,一种油气水多相流流型在线识别方法,发明专利,ZL01115235.4,授权日：2004年4月21日

[1]Z.Y.Luo,.FXu,B.F.Bai,T.J.Lu.Anti-bodybasedbioparticlecaptureusingmicrofluidicsforglobalhealth,inMicrofluidicApplicationsforHumanHealth(EditedbyU.Demirci,B.Langer,A.Khademhosseini,J.Blander),2010

[2]白博峰编，第四章翅片管式换热器，换热器手册，中国石化出版社，2011

[1] Chengzhen Sun, Wen-Qiang Lu, Jie Liu, Bofeng Bai. Molecular dynamics simulation of nanofluid’s effective thermal conductivity in high-shear-rate Couette flow. International Journal of Heat and Mass Transfer, 2011. doi:10.1016/j.ijheatmasstransfer.2011.02.005. EI: IP51292517. (SCI源刊)

[2] Bofeng Bai, Huijuan Sun, Haibin Zhang and Li Liu, Numerical Study on Turbulent Mixing of Spray Droplets in Crossflow. AIAA Journal of Propulsion and Power, 2011, 27(1): 132-143. SCI: 711EZ. / EI: 20110213569595

[3] Bofeng Bai, Maolong Liu, Wang Su, Xiaojie Zhang. An experimental study on air-water two-phase flow patterns in pebble beds. ASME Journal of Engineering for Gas Turbines and Power, 2010, 132 (4): 042903. SCI: 549AL / EI: 20104913465899

[4] Sijie Li, Bofeng Bai. Multi vapor embryos nucleation process and spinodal analyses of expandable superheated water system. Nanoscale and Microscale Thermophysical Engineering; 2010, 14(3): 174-185. SCI: 644FM

[5] Z.Y. Luo, F. Xu, T.J. Lu, B.F. Bai. Direct Numerical Simulation of Single Leukocyte Deformation in Microchannel Flow for Disease Diagnosis. Journal of Medical System. 2010. DOI: 10.1007/s10916-010-9502-3.

[6] M. Lin, F. Xu, T.J. Lu, B.F. Bai. A review of heat transfer in human tooth – Experimental characterization and mathematical modeling, Dental Materials. 2010. DOI: 10.1016/j.dental.2010.02.009. SCI: 588PS / EI: 20101712884440.

[7] M. Lin, Q.D. Liu, F. Xu, Kim T, B.F. Bai, T.J. Lu. Thermal property measurement of different human tooth layers using a modified monotonic heating regime method. Infrared Physics & Technology. 2010. DOI: 10.1016/ j.infrared. 2010.09.004. (SCI源刊)

[8] Bofeng Bai, Haibin Zhang, Li Liu, Huijuan Sun. Experimental study on turbulent mixing of spray droplets in crossflow. Experimental Thermal and Fluid Science. 2009, 33(6):1012-1020. SCI: 472WB / EI: 20092812175778

[9] 厉思杰, 白博峰. 可膨胀过热水系统多气核演化过程与临界过热度分析. 物理学报. 2009, 11, 7596-7602. SCI: 520HV / EI: 000271835200034

[10] L. J. Guo, L. Zhao, D.W. Jing, Y.J. Lu, H.H. Yang, B.F. Bai, X.M. Zhang, L.J. Ma, X.M. Wu. Solar hydrogen production and its development in China. Energy, 2009, 34 (9): 1073-1090. SCI:497QV / EI: 093312257299

[11] Jun Huang, Yanping Huang, Qiuwang Wang, Bofeng Bai. Numerical study on effect of gap width of narrow rectangular channel on critical heat flux enhancement, Nuclear Engineering and Design, 239(2): 320-326. SCI: 408TR / EI: 20090411877318

[12] Jun Lu, Bofeng Bai. Thermosolutal Convection and Solute Segregation during the vertical Bridgman growth of Hg1-xCdxTe single crystals. Journal of Crystal Growth. 2008, 12:38-46. SCI: 399JP / EI: 085211809916

[13] Bofeng Bai, Shaojun Zhang, Liang Zhao, Xin Wang, Hanyang Gu. Online recognition of the multiphase flow regime. Science in China Series E. 2008, 51(8): 1186-1194. SCI: 322UF / EI: 082911377902

[14] M. Lin, Z.Y. Luo, B.F. Bai, F. Xu, T.J. Lu. Fluid mechanics in dentinal microtubules decides the difference between hot and cold tooth pain. Plos ONE. 2011. (In press)

[15] M. Lin, Z.Y. Luo, B.F. Bai, F. Xu, T.J. Lu. Fluid dynamics analysis of shear stress on nerve endings in dentinal microtubule: A quantitative interpretation of hydrodynamic theory, Journal of Mechanics in Medicine and Biology, 2011. (In press)

[16] Z.Y. Luo, F. Xu, T.J. Lu, B.F. Bai. Direct numerical simulation of the detachment of single captured leukocyte under different flow conditions, Journal of Mechanics in Medicine and Biology. 2010. (In press)

[17] B.F. Bai, X.J. Zhang, M.L. Liu, W. Su. Flow Regime Classification and Transition of Flow Boiling Through Porous Channel. Nuclear Engineering and Design, 2011.(Accept)

[18] Yufei Mao, Liejin Guo, Bofeng Bai and Ximin Zhang. Convective heat transfer in helical coils for constant-property and variable-property flows with high Reynolds numbers. Frontiers of Energy and Power Engineering in China. 4(4): 546-552, 2010

[19] Yanpeng Li, Bofeng Bai, Hydrodynamic resistance effect of fluid layer between two immersed approaching particles; China Particuology. 2006, 4(5): 220-228

[20] 毛宇飞, 郭烈锦, 白博峰. 混合长度理论的改进及其在变物性传热中的应用. 工程热物理学报. 2011, 32(1): 58-62. EI: 20110813693216

[21] 刘茂龙, 吕友军, 白博峰, 苏望; 闫晓; 肖泽军. 球床内气液两相流流型及压降实验研究. 工程热物理学报2010, 31(11): 1867-1871. EI: 20104913465899

[22] 张佳, 吕友军, 张西民, 白博峰. 超声作用下不同粗糙度表面沸腾换热实验研究. 工程热物理学报. 2010, 31(9): 1524-1527. EI: 20103913261072

[23] 王科; 白博峰. 高速气液两相流液膜卷吸夹带数值模拟研究. 工程热物理学报. 2010, 31(6): 968-970. EI: 20102613046141

[24] 张海滨, 刘利, 孙慧娟, 白博峰. 横流中单喷嘴雾化形态与两相掺混特性研究. 西安交通大学学报. 2010, 44(7): 104-108. EI: 20101612868698

[25] 毛宇飞, 郭烈锦, 甄飞强, 郭萌, 张文斌, 白博峰. 螺旋管内汽水两相流摩擦阻力特性实验研究. 工程热物理学报. 2010, 31(3): 443-446. EI: 20101612868698

[26] 毛宇飞, 郭烈锦, 白博峰. 基于第Reynolds数k-ε模型的超临界流体对换热的快速计算模型. 化工学报. 2010, 61(2): 281-288. EI: 20101412827226

[27] 张海滨, 刘利, 孙慧娟, 白博峰, 单喷嘴横流气雾两相流掺混实验研究. 工程热物理学报, 2009, 30 (10):1681-1684. EI: 20094512433626

[28] 张晓杰, 苏望, 白博峰, 阎晓. 多孔结构内流动沸腾流型分类及转变研究. 工程热物理学报, 2009, 30 (6): 967-970. EI: 20092612154415

[29] 孙慧娟, 白博峰, 张海滨, 刘利. 喷嘴入射方式对气体-液滴群掺混的影响, 固体火箭技术, 2009: 492-495+510. EI: 20101312808313

[30] 孙慧娟, 张海滨, 刘利, 白博峰. 气体-颗粒掺混的数值模拟研究. 工程热物理学报. 2009, 30(2): 241-245. EI: 20091011946475

[31] 张晓杰, 朱彦雷, 白博峰, 阎晓, 肖泽军.多孔球层内沸腾现象与传热特性研究. 核动力工程. 2009, 30(1): 45-49+73. EI: 091111955656

[32] 张书平, 吴革生, 于志刚, 李亮, 白博峰. 含湿天然气超音速凝结研究, 工程热物理学报, 2008, 30 (11): 1975-1878. EI: 084711720334

[33] 陆军, 白博峰, 郭烈锦. 二元半导体合金垂直Bridgman晶体生长的热质对流Ⅰ-原型炉, 人工晶体学报. 2008, 37(3), 561-567. EI: 083111424558

[34] 陆军, 白博峰, 郭烈锦. 二元合金垂直Bridgman晶体生长过程的热质对流研究II-三段热管炉.人工晶体学报. 2008, 37(3):592-597. EI: 20083111424563

[35] 白博峰, 姜茂, 闫鹏. 流动沸腾核态抑制的实验研究. 化学工程, 2008, 36(9): 15-18. EI: 084411669174

[36] 李赟, 白博峰, 阎晓, 肖泽军. 微气泡形成过程及温度影响研究. 工程热物理学报. 2008, 29(9): 1511-1514. EI: 084411669174

[37] 姜茂, 白博峰. 流动沸腾空穴核化机理的实验研究. 工程热物理学报. 2008, 29(3): 434-438. EI: 083811573006

[38] 孙慧娟, 张海滨, 白博峰. 高温燃气中单个液滴的蒸发特性.西安交通大学学报. 2008, 42(7): 833- 837. EI: 081311170785

[39] 陆军, 白博峰, 郭烈锦. 垂直Bridgman多组元化合物晶体生长热质对流.工程热物理学报. 2008, 29(4): 453-458. EI: 081711223117

[40] Wang Yueshe, Bai Bofeng, Yongli Chen. Numerical Gas-liquid Stratified Flow Regime Model on Evaporation Heat Transfer in Horizontal Micro-fin Tubes. Heat Transfer-Asian Research. 2007, 36(6): 315-323. EI:74010841345

[41] 白博峰, 王彦超, 黄蓉, 肖泽军. 同心环形管内沸腾两相流动与传热试验研究. 核动力工程. 2007, 27(6): 48-53. EI: 080411058857

[42] 王跃社, 白博峰, Hiroshi Honda. 水平微肋管内基于气液环状流流型的沸腾传热理论模型. 工程热物理学报. 2007, 28(Suppl.1): 177-180. EI: 073410776564

[43] 白博峰, 李恒, 苏燕兵, 王跃社. 矩形腔内纯水凝固过程实验研究. 工程热物理学报. 2007, 41(5): 435-438. EI: 072410652526

[44] 黄军, 王秋旺, 黄彦平, 白博峰. 窄间隙矩形通道的临界热流密度解析模型. 动力工程. 2007, 27(6): 923-926. EI: 080211013283

[45] 黄军, 王秋旺, 黄彦平, 白博峰. 窄间隙矩形通道沸腾传热强化判定准则研究. 化学工程. 2007, 35 (11): 13-16. EI: 080211013300

[46] 黄军, 王秋旺, 黄彦平, 白博峰. 窄间隙矩形通道间隙厚度对传热强化影响研究. 核动力工程. 2007, 28(6):48-53. EI: 080411058861

[47] 李恒, 白博峰, 苏燕兵, 张磊, 郭烈锦. 用NH4Cl-H2O溶液共晶凝固实验模拟Bridgman法晶体生长过程. 西安交通大学学报. 2007, 41: 1298-1302. EI: 075110983355

[48] 苏燕兵, 陆军, 白博峰. 封闭腔内水自然对流换热数值模拟. 化工学报. 2007, 57(11): 2715-2720. EI: 074910962342

[49] 李彦鹏, 张乾隆, 白博峰. 竖直通道内相邻气泡对上升的直接数值模拟.热能动力工程. 2007, 22(4): 375-379. EI: 73310766899

[50] 白博峰, 王彦超, 肖泽军. 同心环形管强迫流动与传热试验研究. 化学工程. 2007, 35(6): 12-15. EI: 73010707305

[51] 徐城杰, 白博峰, 王先元, 刘鸿运. 有限深度液体中气泡破碎的参数影响. 核动力工程. 2006, 271 (S1): 86-90+98. EI: 063110043048

[52] 白博峰, 徐城杰, 姜茂, 刘鸿运, 王先元.有限深度液体中气泡的破碎条件. 西安交通大学学报. 2006, 40(5): 577-581. EI: 062910013823

[53] 李恒, 白博峰, 陆军, 郭烈锦. 圆柱腔体内水凝固过程热对流实验研究. 工程热物理学报. 2006, 27(6): 977-980. EI: 070310373003

[54] 陆军, 李恒, 苏燕兵, 白博峰. 垂直Bridgman法多组元晶体生长的多场耦合模型. 西安交通大学学报. 2006, 40(5): 582-586. EI: 062910013824

[55] 王俊奇, 徐永高, 薛中天, 徐惊雷, 白博峰. 气井井筒跨音速气水分离与旋流排液技术. 石油学报. 2006, 27(5): 119-123. EI: 064710258443

[56] 刘文红, 郭烈锦, 张西民, 白博峰, 吴铁军. 水平管内油气水三相流分流型阻力特性实验研究. 工程热物理学报. 2006, 26(1): 80-83. EI: 05098866601

[57] M. Lin, Z.Y. Luo, B.F. Bai, F. Xu, T.J. Lu. Modeling of nociceptor transduction in tooth pain sensation, Proceeding of 3rd International Conference on Bioinformatics and Biomedical Technology, 2011

[58] Bofeng Bai, Sijie Li1, Xiaofei Lv. Effects of solid wall on Boiling Nucleation by Molecular Dynamics Simulation. Proceedings of the 2nd European Conference on Microfluidics - Microfluidics 2010 - Toulouse, December 8-10, 2010. µFLU10-256

[59] Bofeng Bai,Denghui He, Yong Xu, Canghai Yang, Li Li. Water cut measurement of crude oil slug flow with double-tube capacitance sensor. 6th World Congress on Industrial Process Tomography, September 6-9, 2010, Beijing, China

[60] Sijie Li, Bofeng Bai. Novel Study on Heterogeneous Boiling Nucleation with Solid Wall Condition. 7th International Conference on Multiphase Flow.ICMF 2010, Tampa, FL USA, May 30-June 4, 2010.

[61] Huijuan Sun, Haibin Zhang, Li Liu and Bofeng Bai. Effect of Nozzle Injection Mode on Mixing Characteristics of Evaporating Spray with Crossflow. 7th International Conference on Multiphase Flow. ICMF 2010, Tampa, FL USA, May 30-June 4, 2010.

[62] Bofeng Bai, Sijie Li. Vapor Embryo Nucleation in Near-Wall Region under Pool Boiling Conditions. IHTC14: Proceedings of the International Heat Transfer Conference, August 8-13, 2010, Washington, DC, USA, IHTC14-22142

[63] Bofeng Bai, Maolong Liu, Xiaofei Lv, Wang Su, et al. Single phase and Two-Phase Flow Pressure Drop in Pebble Beds. ICONE18: Proceedings of the 18th International Conference on Nuclear Engineering, May 17-21, 2010, Xi’an, China, ICONE18-30371

[64] Guo Liejin; Bai Bofeng, Zhao Liang; Wang Xin; Gu Hanyang. Online recognition of the multiphase flow regime and study of slug flow in pipeline. 6th International Symposium on Measurement Techniques for Multiphase Flows, Dec. 15-17, 2008, Japan, Plenary lecture Paper. Journal of Physics: Conference Series, 2009: 012047

[65] Lin M, Liu QD, Xu F, Bai BF, Lu TJ. In Vitro investigation of heat transfer in human tooth. 4th International Conference on Advances in Experimental Mechanics Singapore, SINGAPORE, NOV 18-20, 2009. ISTP: BSR97

[66] Bai Bofeng, Liu Maolong, Zhang Xiaojie. An Experimental Study on Air-Water Two-Phase Flow in Pebble Beds. 17th International Conference on Nuclear Engineering (ICONE17).2009. 495-501. ISTP: BRE11

[67] Bai Bofeng, Zhang Xiaojie, Liu Maolong, Su Wang. Flow Regime Classification and Transition of Flow Boiling Through Porous Channel. 17th International Conference on Nuclear Engineering (ICONE17). 2009: 487-493. ISTP: BRE11

[68] Jun Lu, Bofeng Bai, Zhixiang Wen and Liejin Guo. Thermosolutal Convection and Solute Segregation of HgCdTe Alloy during the Vertical Bridgman Single Crystal Growth. HT2008: Proceedings of the ASME Summer Heat Transfer Conference, 1: 705-711. EI:20093812319900 / ISTP:BJH88

[69] Bofeng Bai, Jun Lu, Lei Zhang and Heng Li. Experimental Study on Double-Diffusive Convection during Solidification of NH4Cl-H2O Hypereutectic Solution in Cylindrical Cavity. HT2008: Proceedings of the ASME Summer Heat Transfer Conference, 1: 713-718. EI: 093812319901 / ISTP: BJH88

[70] Li LIU, Haibin ZHANG, Huijuan SUN, Bofeng BAI. Turbulent mixing flow structure of spray droplets in crossflow. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, 2009.

[71] Haibin ZHANG, Li LIU, Huijuan SUN, Bofeng BAI. Mixing behavior of angled-injected centrifugal spray droplets in crossflow. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, 2009.

[72] Wen ZX, Lu J, Bai BF. Solute Layers and Double-Diffusive Interfaces during the Solidification of NH4Cl-H2O in Rectangular Cavities. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, 2009. ISTP: BQA50

[73] X. L. Guo, Bongfeng Bai. Study on length of mixed region during purging of gas pipeline. Asian Symposium on Computational Heat Transfer and Fluid Flow. 2007, Xi'an, China.

[74] Bai Bofeng, Li Heng, Lu Jun, Su Yanbing. Experimental Study on Double-Diffusive Convection during Solidification of NH4Cl-H2O Hypereutectic Solution in Cylindrical Cavity. International Conference on Multiphase Flow, ICMF 2007.2007, Leipzig, Germany. EI: 081711223117

[75] Bai Bofeng, Su Yanbing, Li Heng. Measurement and Simulation of Velocity Field during the Buoyancy-Driven Freezing of Water. 1st Asian Symposium on Computational Heat Transfer and Fluid Flow. 2007, Xi'an, China.

[76] Huang J., Wang Q. W., Huang Y. P., Bai B. F. Analytical model study of critical heat flux in rectangular narrow channel. International Conference on Power Engineering, 2007.1007-1010, ISTP: BHP42

[77] Jun Lu, Bofeng Bai, Liejin Guo. Thermosolutal Convection and Solute Segregation of Binary Alloys in the Vertical Bridgman Single Crystal Growth. Euromat 2007, European Congress on Advanced Materials and Processes. 2007, Nürnberg, Germany.

[78] Bofeng Bai, Liejin Guo, Yanbing Su, Heng Li, Guoxiang Wang. Measurement and Simulation of Velocity Field during the Solidification of NH4Cl-H2O. Euromat 2007, European Congress on Advanced Materials and Processes. 2007, Nürnberg, Germany.

[79] Heng Li, Yanbing Su, Bofeng Bai, Liejin Guo. Effect of Density Extremum on the Solidification of Water in Both Rectangular and Cylindrical Cavity. Euromat 2007, European Congress on Advanced Materials and Processes. 2007, Nürnberg, Germany.

[80] Jun Lu, Bofeng Bai, Liejin Guo, Yanbing Su, Guoxiang Wang. Analysis on Thermosolutal Convection during the Directional Solidification of GeSi Alloy. 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference. 2007, Vancouver, British Columbia, Canada.

[81] LuYun, BAI Bo-feng, Yan Xiao, Xiao Ze-jun. Simulation on Microbubble Generation and Temperature Effection of Argon System. Asian Symposium on Computational Heat Transfer and Fluid Flow. 2007, Xi'an, China.

[82] Bai BF, Zhao L, Wang YS. Characterization of pressure fluctuation in boiling two-phase flow. 13th Int. Heat Transfer Conference. 2006, Sydney, Australia.

[83] Bofeng Bai. Antibody Based Blood Bioparticles Capture and Separation using Micro- fluidics for Global Health. International Workshop on Biomedical Engineering & Bio- mechanics, Xi’an, China, August 20-22, 2010 (Keynote Paper)

[84] Bofeng Bai, Liejin Guo, Shaojun Zhang, et al. Gu. Innovative Techniques of Multiphase Flow in Pipeline System for Oil-Gas Gathering and Transportation with Energy-Saving and Emission-Reduction. 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi’an, China, 11-15 July 2009. Plenary lecture Paper No. PL01. ISTP: BQA50